Wie man die Muschi trocknet

Die Bedeutung des richtigen Trocknens für Pocket Pussies verstehen

Honestly I really wish I learned these drying ways for my pocket pussy years ago! So much better than just putting it aside to air-dry! The balance of being totally dry, but that wonderful, supple softness is just bang on (and I’m not just saying that! The cloth is very soft and feels so good each time you reuse it. Once it’s totally dry, I lightly dust the surface with maintenance powder, then put it back into its storage container. It’s become a weekend solo downtime staple for me!

It takes a bit more time to handle and dry after washing, but the exquisite texture that results is completely worth the effort! Be sure to check out my “PRO TIPS” below, but first let’s have a look at how to properly dry your pocket pussy.

Schritt-für-Schritt-Anleitung: Trocknungstechniken für die Pflege Ihrer Taschenmuschi

Step 1: Remove Excess Water (Immediate Wash Action)

With both hands, gently squeeze the toy from the base (closed end) toward the aperture, pushing huge pockets of water out of the internal canal. Then aim the hole down into the sink and give it a few vigorous shakes downwards to dislodge any droplets that cling to it.

Be careful not to twist, wring (like a towel) or overstretch the canal during this operation. Such rough treatment might result in permanent tearing of the fragile TPE or soft silicone materials.

Step 2: Solving the Problem of Internal Drying (Main Drying Techniques)

Most toys have very tight internal canals with intricate realistic folds. Airflow is highly restricted. Moisture deep within the canal is the most difficult to totally eradicate. Here are three really effective ways to dry yourself internally:

Assisted Air Drying (Safest Option): Place a small desk top fan or USB fan on a firm surface and direct the airflow into the opening of the toy (which should be left open). This constant flow of air greatly speeds up the drying process without the danger of overheating and ruining the cloth.

Direct Cool Air (Quick Fix): If you’re using a typical household hair dryer, you MUST (no exceptions!) change it to “Cold Air” or a no-heat setting. TPE and soft silicone can be permanently deformed or even melted within minutes by a gentle stream of warm or hot air.

specialized Toy Dryer (The Professional Option): If you use it often, you might want to invest in a specialized electric toy dryer. These devices are specially made for enclosed canals and employ low-pressure, room temperature airflow to securely and fully dry complicated internal textures, usually in 10-15 minutes.

Step 3: Post-Drying Care (Removing Stickiness)

Once you are sure the toy is completely dry, inside and out, don’t put it away right away. Washing will strip the natural protective layer from the TPE surface and render it very sticky. The interior should be sprayed with a maintenance powder to avoid sticking and to restore the skin-like suppleness of the material.
Directions: Sprinkle a liberal amount of special maintenance powder (Renewing Powder) or pure cornstarch into the dry aperture. Place your palm over the hole and shake it up and down and side to side and back and forth, massaging the channel softly from the outside so the powder distributes evenly over every wrinkle of the inner wall. Finally turn the hole downwards, tap and shake out any excess loose powder and the object is ready to be packaged and stored.

If you are not certain that the deep interior is totally dry, carefully insert a dry cotton swab to the bottom of the channel and wipe. If any moisture has been absorbed by the swab, continue to air dry but do not powder at this stage, since a paste will be formed that is difficult to remove.